How to Make Shoe Goo Dry Faster

How to Make Shoe Goo Dry Faster

How to Make Shoe Goo Dry Faster for Shoe Goo is a popular adhesive used to repair shoes, boots, and other items. However, it can take up to 24 hours for Shoe Goo to dry completely. If you need to make Shoe Goo dry faster, there are a few things you can do

 

How to Make Shoe Goo Dry Faster

How to Make Shoe Goo Dry Faster for your Shoes have transformed into being a very natural part of our attire. We only ever think about the appeal or fashion of pairs of shoes rather than the usage as. Overtime, the shoe will naturally wear out due to degradation or repeated usage, mostly both.

 

How to Make Shoe Goo Dry Faster

In this article, we are going to talk about how to apply & what to do after you have used a silicone based rubbery adhesive like Shoe Goo and tell you how to make shoe goo dry faster after you have already used them for some time. If you follow our article and its step-by step guide, then we are sure that you will be able to complete this task in no time.

How to Make Shoe Goo Dry Faster

Instead of just throwing out a torn pair of shoes, it is far more logical to attempt to repair it, especially if the damage is not critical. At present, there are a lot of simple and easy solutions that may be more economical than splashing money on a new pair with each tear. One such method is the use of adhesives, for example, Shoe Goo.

Things We Need to Make Shoe Goo Dry Faster

You only need a few objects in order to apply the adhesive to your favorite pair of damaged sneakers. Almost all of these are household items that you should be finding lying around. The items can be substituted with something else. Only the utility is important, not the objects themselves. For this guide, we will be using the following items:

  • A Paintbrush
  • An old newspaper
  • Shoe Goo Adhesive
  • Electric Fan
  • A lighter

How to Make Shoe Goo Dry Faster

Applying Shoe Goo

Application is a simple procedure and there are no specifics that you have to worry about. If you are confused with how to approach this, you can follow this simple procedure.

Preparing the Surface

The first thing you’ll have to do is to prepare a clean surface to work on. It is preferable to remove dirt, dust and any sort of particles from your workstation as it might stick to your footwear during your application.

You Should Also Wash Your Footwear

You should also wash your footwear and air dry them beforehand. For the mixture itself, the tube comes double sealed so you need to carefully take the foil off and puncture the coating with the cap. Afterwards, pour the tube into a bowl and mix with your brush until it is an even color. Otherwise, apply directly to the surface of the shoe and use a spreader to evenly distribute the gel.

Application

Use the brush or any other spreader to apply a thin layer of shoe goo on your desired surfaces. If you want to reattach separated pieces, apply similarly on both sides of the pieces and join them together. Make sure the mixture is spread all across the tear or separation and firmly connect them as well.

Use the Brush to Apply a Thin Layer of Shoe Goo

Inspection of How to Make Shoe Goo Dry Faster

Clean off any excess mixture on your footwear with a cloth or towel. Also be weary of any potential bubbling within your application. If that is that case, just spread the good more evenly or use a lighter to carefully pop the bubbles. Using excess goo may result in this

Clean Your Footwear By towel

Drying of How to Make Shoe Goo Dry Faster

After the application of the initial thin layer, it is important to let it dry before applying it again. Usually, the initial layer will be dry within 1-2 hours but the time it takes may vary from place to place. Keep the shoes isolated and let them dry before moving on to apply the next layer.

Drying the Shoes Before Applying Shoe Goo

Applying a second layer

Depending on the repair work, you should be following up on the primary thin layer with either another thin layer for minimal damage or a thick layer to fix more drastic damages.

Adding a second thin layer

After the first thin coat has dried up, you can use the same method in order to add an extra layer of protection to your footwear. Use your brush or spreader to apply the mixture over your footwear and leave it out to dry for another few hours.

Adding a thicker Layer

If your damage is quite significant, you may want to apply more Shoe Goo in order to repair your footwear. Apply Shoe Goo as needed and scrape off excess mixture as before. The initial layer will act as a solid platform and strengthen it as well. Leave the shoes to dry again.
Just like that, your work is done! If you followed these procedures correctly, your shoes should be solid and stronger than ever!

Cleaning & Storage of the Product Shoe Goo is very difficult to remove once it has dried up. Therefore, it is important to be able to properly clean the cap. This is because, if there are any residue in the cap, it will dry up and very difficult to reopen.

Applying Shoe Goo

This is a simple guideline you can follow if you are looking to use Shoe Goo yourself and have no prior experience. Remember to clean off the surfaces and apply the gel as needed. There is a gun called shoe goo heat gun is really useful for applying shoe goo on your shoe.

Drying Shoe Goo Faster & Precautions:

The important bit is drying the applied gel. Nobody wants to wait so many hours before being able to go on with what is basically a repeat of the procedure. Thankfully, Shoe goo can easily be dried quicker. The following are some simple steps to dry the gel faster.

  • You can apply electronic devices like a fan or blower while the Gel is still wet. This will help certain parts of the gel to dry up quicker than if left alone
  • A heat gun is also applicable on low settings. The adhesive will coagulate and dry faster
  • Placing the surface under direct sunlight will help it dry faster compared to it being inside your room

As with any other procedure, there are some pointers you have to keep in mind before you try to quickly dry your gel

Drying the Shoe By Using Electric Fan
  • Using extreme heat will damage the adhesive and ruin it, requiring you to scrape off the remains and starting over
  • Using higher settings on your electrical devices may result in damaging the gel as well.

FAQ

Is Shoe Goo Waterproof?

Yes! Shoe Goo is waterproof and it can act as a water-resistant right after you start applying it on something. After the gel sets in, it is very strong and acts as a weather & temperature resistant adhesive as well as being waterproof. People can use it to coat the surface of their shoe so that it can be sealed. It may take up to 2-4 hours after initial application of the gel for it to dry up and set, but the gel itself is waterproof out of the tube.

Is Shoe Goo Just Silicone?

Shoe Goo is an adhesive and sealant that can be used to repair shoes and other footwears. This product is mainly made of a specialized type of rubbery cement that contains a solvent that is cleaning/degreasing and also an abrasion-resistant synthetic rubber.

It can be considered an industrial grade glue made for patching up footwear. Think of Silicone as a sealant while shoe goo is a waterproof sealant adhesive.

Does Shoe Goo Work on Plastic?

Shoe Goo can be used on almost all kinds of surfaces, but it will be not as effective everywhere. It works best with surfaces that are more porous or rough. The plastic surface is quite smooth compared to leather or wood. So, the gel will not be as strong. This is because smoother surfaces have few pores where the adhesive can set in and dry up. Therefore, the gel will be easily displaced.

Before applying it to plastic surfaces, you can scratch the surface with a sharp tool or sandpaper. This will improve the effectiveness a bit but there is no guarantee that the gel will hold.

What Will Shoe Goo Stick to?

Shoe goo is an adhesive and as such, it can be used on most materials like rubber, wood, metal, concrete etc. It works better on rougher surfaces as the more porous ones tend to stick more coherently compared to smoother surfaces. However, it will still work on smooth faces like plastic and glass. You can use shoe glue for soles to repair shoe soles.

Conclusion

So, there you have it, you have now got the complete step-by-step guideline on how apply as well as tips on how to make Shoe Goo dry faster. We hope that you learned something new from us. If you have any question regarding the steps or any other topic, please feel free to write your opinion in the comments section below.

If you liked our content, be sure to check out our other articles where we talk everything related to shoes and how you can be comfortable with them.

Please do be careful when you are applying the gel on the shoes. The gel is quite difficult to remove once it dries up so apply the adhesive carefully. Also use tools and not your own fingers when applying the gel on the footwear. Finally, remember to clean off any excess dripping and take care of your shoes once you apply the protection!

You may read also – How to Shrink Leather Shoes With Vinegar

Leave a Reply

Your email address will not be published. Required fields are marked *